acid etching
英 [ˈæsɪd ˈetʃɪŋ]
美 [ˈæsɪd ˈetʃɪŋ]
网络 酸处理; 酸蚀; 酸蚀剂; 牙面进行酸蚀; 酸洗
双语例句
- Switch to an interest-paying current account and stay in credit. Most banks and larger building societies now offer these accounts
转成付息的活期存款账户，并保持账上有余额。多数银行和较大的购房互助会现在都能开立这种账户。 - Intaglio engraving of rejectamenta acid etching chemicals.
凹版雕刻用酸性蚀刻化学品废弃物。 - UHMWPE fiber were treated by chromic acid etching and chemical vapor depositing polypyrrole ( PPy).
采用铬酸刻蚀和化学气相沉积聚吡咯处理了超高相对分子质量聚乙烯（UHMWPE）纤维。 - Concave Microlens Arrays Produced by Femtosecond Laser With HF Acid Etching
飞秒激光和酸刻蚀方法制作凹面微透镜阵列 - Effect of hydrofluoric acid etching time on Ni/ 6H-SiC contacts
***刻蚀对Ni/6H-SiC接触性质的作用 - Effect of acid etching on electrical performances of microchannel plate;
讨论微通道板玻璃的二次电子发射系数及其影响因素。 - The effect of the sclerotic dentin repaired with composite resin can be affected by the quality and quantity of hybrid layers and resin tags, and different etching systems and acid etching time.
混合层和树脂突的质和量以及不同的酸蚀系统和酸蚀时间都会影响硬化牙本质的复合树脂黏结修复效果。 - Light sandblasting or acid etching may be sufficient but must be completely neutralized before grouting.
轻喷砂或酸蚀可充分，但是在灌浆前必须完全中和。 - A new method for testing the acid etching depth of WC-Co cemented carbide by flame atomic absorption spectrometry and glow discharge spectrometry has been studied.
研究了原子吸收光谱法和辉光放电光谱仪定量测定硬质合金去钴深度的新技术。 - Acid etching result shows that the crystal has regional single domain structure.
酸腐蚀结果表明，晶体具有区域性单畴结构。 - Effects of air abrasion and acid etching on the micro-morphology of resin tags
空气喷磨和酸蚀与树脂突超微结构的关系 - Macroscopic Examination on Solidification Structure and Defect of Continuously Cast Steel by Cold Acid Etching
连铸坯凝固组织和缺陷的冷酸蚀法宏观检验 - The methods of injecting gelling acid by single-stage and injecting micelle acid by single-stage with low delivery rate are not visibly effective for improve the flow conductivity of acid etching fracture.
单级注入胶凝酸和小排量单级注入胶束酸对提高酸蚀裂缝导流能力效果不佳。 - Research on variation of velocity sensitivity and water sensitivity before and after acid etching in carbonate reservoir
酸蚀前后碳酸盐岩储层速敏性和水敏性变化研究 - Based on the analysis of these recorded environmental parameters, an artificial acid rain liquid and an accelerated testing procedure were developed, and a set of accelerated weathering test installation was improved to simulate better the outdoor acid etching effects.
通过对这些环境参数的记录分析，研制出一种仿酸雨溶液和一个加速测试程序，并对一款加速老化试验装置进行了改进，使其能极好地模仿户外的酸蚀结果。 - Objective: To compare phosphoric acid etched and laser etched human enamel surfaces and evaluate the possibility of using laser etching as a new technique to take place the conventional acid etching.
目的：对激光和磷酸刻蚀牙釉质进行比较，探讨激光刻蚀是否可作为酸蚀牙釉质表面的一种替代方法。 - We have produced industrial copper sulphate by using acid etching waste liquor and basicity etching waste liquor.
采用酸性蚀刻废液与碱性蚀刻废液混合沉铜的方法，生产工业硫酸铜。 - With this new acidizing model for numerically generated rough-surfaced fractures, it can predict acid etching patterns and its relations with the fracture width, surface roughness, and leak-off rate.
用新的酸化模型对数字生成的粗糙表面裂缝进行模拟，可以预测裂缝的酸刻蚀特征与裂缝宽度、裂缝表面粗糙度和酸滤失速度之间的关系。 - The main factors that impact the rate of hydrofluoric acid etching sacrificial layer is introduced, And the combined first-and-second order model and the extension of this model with radial coordinate is expatiated.
介绍了影响***溶液腐蚀牺牲层速率的主要因素，阐述了一二阶联合模型以及这个模型的极坐标推广。 - EPR method is consistent with the oxalic acid etching test.
EPR法与草酸电解浸蚀试验结果相吻合。 - The present paper introduced the use of acid etching technique to restore the defective anterior teeth in child patients.
本文介绍酸蚀技术在修复患儿前牙牙体缺损的应用。 - Research on Acid Etching Process for Hole-arrayed Glass Substrate
空穴孔阵玻璃基片的酸加工工艺研究 - The strength of chemical-strengthening glass is analyzed before and after surface acid etching, and the strength reservation of glass corroded is studied.
对离子交换增强玻璃表面不同程度酸腐蚀后强度变化的情况进行了分析，并对表面腐蚀后强度的保留进行了研究。 - The influences to IGA under different condition were analyzed, especially, through changing the sensitization time and temperature, scan rate and solution temperature. The results were compared with the result of the oxalic acid etching test.
研究了不同条件对敏化度的影响，特别是不同敏化时间、敏化温度、扫描速度、溶液温度对奥氏体不锈钢晶间腐蚀性能的影响，并与草酸电解浸蚀实验结果进行对比。 - Objective: To examine the effect of acid etching time on the bonding interface of non-carious cervical sclerotic dentin.
目的：观察酸蚀时间对牙颈部非龋性硬化牙本质-树脂粘接界面超微结构的影响。 - Surfaces were relative smooth and stable when it was prepared by acid etching, galvanic corrosion method, sulfuric acid anodizing method and phosphoric acid-dichromate method. 2.
以经酸刻蚀法、原电池腐蚀法、硫酸阳极氧化法和磷酸-铬酸盐法制备的表面较为光整。 - Along with the increasing of the sandblasting time, the contact angles between water and the hydrophobic surface of pipeline steel increase at first and then decrease. And it also shows the same trend with etching time extension at different concentrations of hydrochloric acid etching solution.
疏水管线钢表面与水接触角随着喷砂时间的延长呈现先增大后减小的趋势；并且在不同浓度盐酸刻蚀溶液下，随着刻蚀时间的延长也呈现先增大后减小的趋势。 - Firstly, after acid etching and alkali-heat treatment, the alloy surface became uniform and beneficial for apatite crystal nucleation and growth.
首先利用酸蚀处理和碱热处理在合金基体上获得了均匀且利于磷灰石晶体形核、生长的表面。 - The roles of each component in solution, the reasons that the nitric acid etching solution can improve the etching factor and waste gas and solution recovery system in exhausted solution were described.
论文分别就蚀刻液中各成分的作用，硝酸蚀刻液能提高蚀刻因子的原因，废液废气的回收系统进行了研究。 - This paper researched on the strengthening process of the K9 optical glass. This process used heat treatment, acid etching, ion exchange to strengthened optical glass, and strengthened again the sample which can not get a well effect. It can save material and reduce cost.
本文研究了K9光学玻璃的强化工艺，采用热处理、酸腐蚀、离子交换三种方法的综合来强化光学玻璃，并对强化效果不好的试样进行二次强化，从而节约材料，降低成本。